F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Auxiliary Step / Running Board: Service and Repair
RUNNING BOARD
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. NOTE:
-
Left side SuperCab shown, regular cab, Crew Cab and tube running board similar. Right side symmetrically opposite.
-
Make sure to disconnect the running board lights electrical connector, if equipped.
Remove the running board.
1
Remove the bolts.
-
To install, tighten to 23 Nm (17 lb-ft).
2
Remove the running board.
3. To install, reverse the removal procedure.