F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
Front Door Hinge: Adjustments
HINGE ADJUSTMENT - FRONT DOOR, ALL AND REAR DOOR, CREW CAB
NOTE: Before carrying out the hinge adjustment, refer to Striker Pre-Adjustment Inspection.
1. Remove the door striker.
2. NOTE: Driver door shown, passenger door and rear doors on Crew Cab similar.
Loosen the hinge bolts on the body only enough to allow for slight door movement.
3. Close and adjust the door until door gaps are uniform and the door is correctly aligned with bodylines on the adjacent panels.
4. Carefully open the door and tighten the bolts.
-
Tighten to 30 Nm (22 lb-ft).