F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
Part 2
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Remove the rear door push button rod.
2. Remove the rear door push button rod linkage.
3. CAUTION: When drilling out the push button rod bellcrank rivet, do not oversize the hole in the door sheet metal.
NOTE: Use the special tool to install the new rivets.
Remove the push button rod bellcrank.
1
Remove the rivet mandrel (center).
2
Drill out the rivet.
3
Remove the push button rod bellcrank.
4. To install, reverse the removal procedure.