F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
2. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or the cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover upward.
2
Remove the shoulder safety belt guide bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
3
Remove the shoulder safety belt guide.
3. Remove the rear door upper trim panel.
-
Pull outward to release the rear door upper trim panel clips.
Lower door trim panel
4. Lift up and remove the shoulder safety belt finish trim panel.
-
Route the shoulder safety belt through the shoulder safety belt finish trim panel opening.
5. Remove the safety belt anchor.
-
Position the safety belt anchor cover downward.
-
Remove the safety belt anchor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
-
Remove the safety belt anchor.
6. Remove the scrivet and the 3 rear door lower trim panel screws.