F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
1. Release the tension on the rear parking brake.
2. Disconnect the RH cable from the LH conduit equalizer, then disconnect the LH cable from the front cable.
3. Remove the 2 wire form bracket bolts from the frame rail and position the cable and conduit aside.
^
To install, tighten to 40 Nm (30 lb-ft).
F-250 and F-350 vehicles
4. NOTE: The parking brake cable and conduit must be routed to the outside of the leaf spring assembly.
Remove the LH parking brake-to-spring U-bolt plate bolt from the LH spring bracket.
^
To install, tighten to 28 Nm (21 lb-ft).
All vehicles
5. Release the parking brake cable from the LH bracket assembly.
6. Rotate the parking brake cable 90 degrees to release it from the parking brake actuating lever and remove the cable.
7. To install, reverse the removal procedure.
Parking Brake Cable - RH
Parking Brake Cable - RH