F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
26. Install the special tool on the front end accessory drive (FEAD) bracket.
27. CAUTION: Use a lifting crane and load leveler rated at a minimum of 907 kg (2,000 lb) or damage to the vehicle may occur.
Position the heavy duty floor crane with a commercially available load leveler and attach the chains to the front of the engine.
28. NOTE: If the engine or body is raised too quickly, you will not get the lift required to remove the LH engine mount. Check the height several
times while lifting.
With the help of an assistant, lift the engine and raise the body 101.6 mm (4 inch) at the same time. Check the clearance between the cab mount
and the body.
29. Support the engine with jackstands or other suitable support devices.
30. Remove the retaining nut from the oil level indicator and tube.