F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
![background image](/ford/f_450_2wd_super_duty/v8-6.4l_dsl_turbo/Page-771004.png)
10. Remove the bolts and the crankcase vent oil separator.
^
Remove and discard the press-in-place gasket.
11. Disconnect the PCM electrical connector and wire retainer.
12. Remove the glow plug module heat shield and pushnuts.
13. Disconnect the glow plug module electrical connectors.
^
Position the glow plug electrical connectors out from under the cowl.