F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
3. Remove the EGR-OC pipe bracket-to-cylinder head bracket bolt and washer. Remove the EGR-OC pipe bracket-to-LH cylinder head bolt,
washers and the bracket.
^
Discard the bolts.
4. Remove the RH turbocharger inlet pipe-to-EGR-OC pipe bolts and the EGR-OC-to-turbocharger bracket bolts.
^
Discard the bolts.
5. Remove the EGR-OC-to-EGR cooler bolts and position the EGR-OC pipe to the left side of the vehicle and aside.
^
Discard the bolts.
6. Remove the exhaust gas temperature (EGT) sensor from the RH turbocharger inlet pipe and position aside.