F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
![background image](/ford/f_450_2wd_super_duty/v8-6.4l_dsl_turbo/Page-587002.png)
CAUTION: Do not install any rubber hoses or steel tubing with a bend entering the filter greater than 60 degrees.
4. Using a suitable length of hose, install the in-line transmission fluid filter. Tighten the clamps.
5. Clean a visible section of the transmission fluid pan and install the sticker.
6. Fill the transmission with clean transmission fluid to the specified level.
^
Verify correct operation.
^
Check the in-line transmission fluid filter for leaks.