F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
NOTE: Install a new clamp on the EGR cooler hose.
Connect the EGR cooler hose and tighten the clamp.
-
Tighten to 4 Nm (35 lb-in).
23. Tighten the vertical EGR cooler mounting bolts.
-
Tighten the M8 bolts to 31 Nm (23 lb-ft).
-
Tighten the M10 bolt to 62 Nm (46 lb-ft).
24. Tighten the bolts for the TB adapter.
-
Tighten to 10 Nm (89 lb-in).
25. NOTE: Install a new O-ring seal.
Install the EGR cooler coolant tube and bolt.
-
Tighten to 10 Nm (89 lb-in).