F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
Part 2
Removal and Installation
CAUTION: Position a suitable protective material in front of the charge air cooler (CAC) or damage to the CAC can occur.
1. Loosen the RH charge air cooler (CAC) tube clamps and disconnect the CAC tube from the flex hoses.
-
To install, tighten to 8 Nm (71 lb-in).
2. Remove the side bolt for the fuel cooler radiator.
-
To install, tighten to 7 Nm (62 lb-in).
3. Remove the bolts for the CAC.
-
To install, tighten to 15 Nm (11 lb-ft).
4. Remove the 4 radiator support clamp bolts and the 2 radiator support clamps.
-
To install, tighten to 10 Nm (89 lb-in).
5. Remove the 2 radiator isolators.