F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
31. Install a new press-in-place gasket. Position the crankcase vent oil separator and the air cleaner outlet tube on the right valve cover. Install the
bolts.
-
Tighten to 13 Nm (115 lb-in).
32. Connect the crankcase vent oil separator drain tube.
33. Tighten the clamp for the air cleaner outlet tube.
-
Tighten to 10 Nm (89 lb-in).
34. Install the starter.
35. If equipped, connect the block heater electrical connector.
36. If equipped, install the transmission fluid tube and indicator. Install the nut.
-
Tighten to 8 Nm (71 lb-in).
All vehicles
37. Install the body.