F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
Control Module: Service and Repair
Transmission Control Module (TCM)
Transmission Control Module (TCM)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the battery ground cable. For additional information, refer to Battery.
3. Remove the transmission control module (TCM) and bracket from the frame.
1. Move the splash shield aside.
2. Remove the bolts.
4. Remove the TCM from the bracket.
1. Disconnect the TCM electrical connector.
2. Remove the bolts.