F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
9. Remove the BSIA from the selector lever mechanism.
1. Pull the BSIA override button.
2. Remove the BSIA screw.
3. Gently pry the clip up and remove the BSIA.
Installation
1. Install the BSIA onto the selector lever mechanism.
1. Pull the BSIA override button.
2. Align the selector lever tab into the BSIA.
3. Position and secure the BSIA with the clip.
4. Install the screw.
2. Install the selector lever mechanism into the vehicle, install the upper bolts and connect the BSIA electrical connector.
^
Tighten to 6 Nm (53 inch lbs.).
3. Install the selector lever mechanism lower bolt.
^
Tighten to 6 Nm (53 inch lbs.).