F 450 4WD Super Duty V10-6.8L (2009)
-
To install (F-250, F-350), tighten the new bolts to 225 Nm (166 lb-ft).
-
To install (F-450, F-550), tighten the new bolts to 400 Nm (295 lb-ft).
3. Inspect the brake caliper anchor plate assembly.
-
Check the guide pin boots for damage and replace as necessary.
-
Check the guide pins for binding and damage.
-
If pins are worn or damaged, install new pins. Lubricate the pins with silicone grease.
4. To install, reverse the removal procedure.
Brake Caliper
Brake Caliper - F-450, F-550
Removal and Installation