F 450 4WD Super Duty V10-6.8L (2009)
Automatic transmission equipped vehicles
14. Lower the transmission and remove the jack.
15. Install the flexplate inspection cover.
1. Position the flexplate inspection cover.
2. Install the 2 bolts.
-
Tighten to 34 Nm (25 lb-ft).
All vehicles
16. Using the Engine Support Bar, Support Hook and Engine Support Bracket, align the engine support insulator studs and lower the engine.
17. NOTICE: Only use hand tools when installing the engine support insulator nuts or damage to the engine support insulator may occur.
Install 4 new RH engine support insulator nuts.
-
Tighten to 115 Nm (85 lb-ft).
18. NOTICE: Only use hand tools when installing the engine support insulator nuts or damage to the engine support insulator may occur.