F 450 4WD Super Duty V10-6.8L (2009)
6. If the evaporator core orifice is broken, screw the end of the Broken Orifice Remover into the broken orifice. Hold the T-handle stationary while
rotating the tool body to remove the evaporator core orifice.
Installation
All vehicles
1. Lubricate the evaporator core orifice O-ring seals in clean PAG oil and install the evaporator core orifice using the Fixed Orifice
Remover/Installer.
2. Connect the evaporator core orifice access fitting.
-
Install a new O-ring seal.
6.4L diesel vehicles
3. Install the RH fender splash shield.
All vehicles
4. Lubricate the refrigerant system with the correct amount of clean PAG oil.
5. Evacuate, leak test and charge the refrigerant system.