F 450 4WD Super Duty V10-6.8L (2009)
Transmission Speed Sensor: Service and Repair
Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor
TorqShift
Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor
Removal
1. Disconnect the Turbine Shaft Speed (TSS) and intermediate shaft speed sensor connector.
2. NOTE: Prior to removing the sensor, make sure that the area around the sensor is free of foreign material to prevent contamination entering the
transmission.
Remove the TSS and intermediate shaft speed sensor.
1. Remove the bolt.
2. Remove the TSS and intermediate shaft speed sensor.
Installation
1. Install the TSS and intermediate shaft speed sensor.