F 450 4WD Super Duty V10-6.8L VIN S (1999)
Alignment: Service and Repair
Toe
1. Start the engine. Center the steering wheel.
2. Turn the engine off. Use a rigid link from the steering wheel to the brake pedal to lock the steering wheel in the straight-forward position.
3. NOTE: If the RH toe measurement is within specifications and only the LH toe measurement needs adjustment, go to Step 6.
Loosen the nuts.
-
Clean and lubricate the steering linkage and tie rod end threads.
4. Rotate the tie rod adjusting sleeve to the correct toe setting.
5. Tighten the nuts.
