F 450 4WD Super Duty V10-6.8L VIN S (1999)
Differential Case: Service and Repair
Removal & Installation
Axle Assembly Removal
1. Remove the wheel and tire assembly.
2. Remove the disc brake calipers.
1. Remove the bolts.
2. Lift the disc brake caliper from the disc brake caliper anchor plate.
-
Using mechanics wire, position the disc brake caliper aside.
3. Remove the disc brake pads.
1. Remove the disc brake pads.
2. Remove the front disc brake caliper anchor rail clips.
4. Disconnect the power vacuum hub hose from the knuckle, then disconnect the ABS sensor.