F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
6. Remove the insulator.
Installation
NOTE: Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
1. NOTE: No lubricants of any kind are to be used during body insulator installation.
Follow the removal procedure in reverse order.
Body Support - Rear, Supercab, Lower
BODY SUPPORT-REAR, SUPERCAB, LOWER
Removal and Installtion
1. Move the front seat forward.
2. Remove the vehicle jack.
3. Remove the rear seat.
4. Pull the carpet or mat back to expose the rear body insulator bolt head.
5. Remove and discard the bolt.