F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
Front Cross-Member: Service and Repair
Transmission Support Crossmember - F-Super Duty
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Install a suitable high-lift transmission jack.
3. Remove the wire harness from the rear crossmember.
4. Remove the rear transmission mount nuts.
5. Remove the LH crossmember bolts and nuts.
1
Loosen, but do not remove, the bolt and nut indicated.
6. Remove the RH crossmember bracket bolts and nuts.
1
Remove the bracket bolts and nuts.
2
Remove the bracket.