F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
![background image](/ford/f_450_4wd_super_duty/v8-6.0l_dsl_turbo_vin_p/Page-640003.png)
8. Remove the transmission range sensor and detent lever assembly.
1
Remove the bolts.
2
Remove the transmission range sensor and detent lever assembly.
3
Disconnect the park rod from the detent lever assembly.
Installation
1. Install the transmission range sensor and detent lever assembly.
1
Connect the park rod to the detent lever assembly.
2
Install the transmission range sensor and the detent lever assembly.
3
Loosely install the bolts.
2. Install the manual control lever shaft.
3. NOTE: Leave a small portion of the pin exposed.
Install the manual valve detent lever shaft retaining pin into the case.