F 450 4WD Super Duty V8-6.4L DSL Turbo (2008)
5. Remove the bolts from the power steering cooler.
-
To install, tighten to 11 Nm (8 lb-ft).
6. Disconnect the horn electrical connector.
7. Remove the horn bracket bolt and the horn.
-
To install, tighten to 9 Nm (80 lb-in).
8. Remove the bolts from the radiator mounting brackets.
-
To install, tighten to 10 Nm (89 lb-in).
9. NOTE: Right side shown, left side similar.
Remove the 2 air deflector pin-type retainers on the front of the radiator support.