F 550 2WD Super Duty V10-6.8L VIN S (2000)
6. Remove the nut on bottom of the engine, near the front engine cover.
7. Remove the nut located on the engine block right above the oil pan rail. Pull the transmission line bracket off of the stud.
8. Remove the stud and the battery ground cable eyelet.
9. Disconnect the starter motor connections.
1
Remove the nut and disconnect the solenoid cable.
2
Remove the nut and disconnect the starter motor positive cable.
10. Remove the cables.
INSTALLATION
1. To install reverse the removal procedure.
