F 550 2WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
Evaporator Core: Service and Repair
REMOVAL
NOTE: If an A/C evaporator core leak is suspected, the A/C evaporator core must be leak tested before it is removed from the vehicle. See: Testing
and Inspection
1. Disconnect the battery ground cable.
2. Remove the suction accumulator/drier. See: Accumulator HVAC/Service and Repair
3. Remove the nuts and reposition the vapor management valve and bracket.
4. Disconnect the condenser to evaporator tube from the A/C evaporator core. Refer to spring lock coupling disconnect and connect procedure.
See: Coupler HVAC/Service and Repair
5. Remove the screws and the suction accumulator bracket.