F 550 2WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
5. Remove the bolts and hold-downs.
6. Remove the EVAP canisters from the bracketing.
7. NOTE: Lubricate all evaporative emission 0-ring seals with MERPOL(R) 0-Ring Seal Lubricant or equivalent meeting Ford specification
ESE-M99B144-B.
To install, reverse the removal procedure.
-
Carry out the evaporative emission canister leak test.
-
Carry out the evaporative emission repair verification drive cycle.