F 550 2WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
Fuel Rail: Service and Repair
Standard Models (Non Bi-Fuel)
REMOVAL
WARNING:
^
DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING OR OR NEAR ANY
FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND CAN BE IGNITED
RESULTING IN POSSIBLE PERSONAL INJURY.
^
FUEL IN THE FUEL SYSTEM REMAINS UNDER HIGH PRESSURE EVEN WHEN THE ENGINE IS NOT RUNNING.
^
BEFORE WORKING ON OR DISCONNECTING ANY OF THE FUEL LINES OR FUEL SYSTEM COMPONENTS, THE FUEL
SYSTEM PRESSURE MUST BE RELIEVED.
1. Remove the throttle body spacer.
2. Disconnect the RH radio capacitor assembly connector.
3. If equipped, disconnect the EGR Vacuum Regulator (EVR).
^
Disconnect the electrical connector.
^
Disconnect the vacuum line.
4. Remove the bolts and the bracket assembly.
