ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

One-Piece, 4x2 With 137-Inch and 141-Inch Wheel Base|Page 4440 > < One-Piece, 4x2 With 137-Inch and 141-Inch Wheel Base|Page 4438
Page 1
background image

Drive/Propeller Shaft: Service and Repair
One-Piece, 4x4 With 137-, 141- and 142-Inch Wheel Base

Driveshaft-Rear, One-Piece, 4x4 With 137-, 141- and 142-Inch Wheel Base 

Removal

 

All vehicles 
1. Raise and support the vehicle. 

2. Index-mark the driveshaft yoke and the transfer case flange.

All vehicles, except Excursion 

3. Index-mark the driveshaft and the rear axle pinion flange.

4. Remove and discard the four bolts and the two U-joint retainers.

One-Piece, 4x2 With 137-Inch and 141-Inch Wheel Base|Page 4440 > < One-Piece, 4x2 With 137-Inch and 141-Inch Wheel Base|Page 4438