ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
One-Piece, 4x2 With 137-Inch and 141-Inch Wheel Base|Page 4444 > < One-Piece, 4x2 With 137-Inch and 141-Inch Wheel Base|Page 4442

F 550 2WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)

Page 5
background image

Excursion 

7. CAUTION:  Install new bolts.

CAUTION:  The driveshaft yoke fits tightly on the rear axle pinion flange pilot. To make sure that the yoke seats squarely on the flange, tighten
the bolts evenly in a cross pattern as shown.

Install the four new bolts.

All vehicles 

8. Tighten the four bolts.

All vehicles 
9. Lower the vehicle.

One-Piece, 4x2 With 137-Inch and 141-Inch Wheel Base|Page 4444 > < One-Piece, 4x2 With 137-Inch and 141-Inch Wheel Base|Page 4442