F 550 2WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
7. Install the hub cap.
8. Install the front disc brake caliper and rotor.
9. Install the front wheel and tire assemblies.
10. Lower the vehicle.
Wheel Hub and Bearing - Motorhome
Wheel Hub and Bearing - Motorhome
Removal
1. Raise and support the vehicle.
2. Remove the front wheel and tire assemblies.
3. Remove the front disc brake caliper and position out of the way.
4. Remove the hub cap and gasket from the hub and rotor assembly.
5. Remove the cotter pin, adjusting nut and flatwasher.