ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Door Handle|Page 9505 > < Front Door Window Regulator|Service and Repair|Page 9498
Page 1
background image

Rear Door Exterior Handle: Service and Repair
Door Handle

Crew Cab

EXTERIOR REAR DOOR HANDLE - CREW CAB

Removal and Installation

NOTE:  The door glass must be in the raised position to remove the exterior door handle.

1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Remove the body plug.
4. Remove the 2 exterior door handle nuts.

-

To install, tighten to 9 Nm (80 lb-in).

5. Release the exterior door handle actuating rod clip and remove the exterior rear door handle.
6. To install, reverse the removal procedure.

SuperCab

EXTERIOR REAR DOOR HANDLE - SUPERCAB

Heavy Duty Riveter

Special Tool(s)

Removal and Installation

1. Remove the rear door trim panel.
2. Position the watershield aside.

3. Disconnect the actuating rods from the latch remote control.

4. NOTE:  Use the special tool to install the new rivets.

Remove the 2 rivets and the exterior rear door handle.

5. To install, reverse the removal procedure.

Door Handle|Page 9505 > < Front Door Window Regulator|Service and Repair|Page 9498