F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
5. Remove the safety belt anchor.
-
Use the Seat Belt Bolt Bit to remove the bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
-
Remove the safety belt anchor.
6. Remove the C-pillar trim panel.
7. Route the safety belt and the shoulder safety belt guide through the C-pillar trim panel openings.
8. Remove the C-pillar trim panel from the vehicle.
9. To install, reverse the removal procedure.
Cab Rear Trim Panel - Crew Cab
CAB REAR TRIM PANEL - CREW CAB
Removal and Installation
1. Remove the child safety seat tether anchor.
2. Remove the left and C-pillar trim panels.
3. Remove the 4 pin-type retainers.
4. Remove the cab rear trim panel.
5. To install, reverse the removal procedure.
Cab Rear Trim Panel - Regular Cab
CAB REAR TRIM PANEL - REGULAR CAB
Removal and Installation
1. Remove child safety seat tether anchor.