F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Position the seat cushion. Install the 4 seat cushion bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
Power seats
2. Connect the power seat switch electrical connector and the seat actuator motors electrical connector. Attach the connectors to the cushion pan.
3. Attach the 3 trim support wire screws that secure the trim cover side face to the seat track riser.
4. Position the seat control switch on the side trim panel. Install the 2 screws.
Heated seats
5. Attach the components to the seat cushion pan. Connect the heated seat element electrical connectors.
