F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
2. Remove the bolt.
-
To install, tighten to 10 Nm (7 lb-ft).
3. WARNING: The metal edges of seat cushion pan can be sharp.
Unclip the J-clips.
4. Position the upholstery and remove the pin-type retainers.
5. Remove the seat cushion foam pad from the frame.
6. CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the seat cushion foam.
Remove the upholstery hook-and-loop strip.
7. To assemble, reverse the disassembly procedure.