F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Electronic Brake Control Module: Service and Repair
Anti-Lock Brake System (ABS) Module
Anti-Lock Brake System (ABS) Module
Removal and Installation
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Push the lock forward and release the ABS electrical connector.
3. Remove the screws and the ABS module.
^
To install, tighten to 3 Nm (27 inch lbs.).
4. To install, reverse the removal procedure.
