ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Other Service Bulletins for Fan Clutch: > < Cooling System - Engine Cooling Fan is Inoperative|Page 3005
Page 1
background image

Fan Clutch: All Technical Service Bulletins
Cooling System - Engine Overheating With Snow Plow On

TSB 06-24-12

11/20/06

6.0L ENGINE OVERHEATING WITH A SNOW PLOW 
INSTALLED ON VEHICLES WITHOUT THE FACTORY 
INSTALLED SNOW PLOW PACKAGE

FORD:
2005-2007 F-Super Duty

This article supersedes TSB 05-23-15 to update the vehicle model years.

ISSUE
Some 2005-2007 F-Super Duty vehicles that are NOT equipped with the factory snow plow package, may exhibit an engine overheat condition if a snow
plow is installed on the vehicle. The condition typically will occur during normal highway driving. This is due to the snow plow blade disrupting airflow
to the engine, causing the cooling fan to stop turning or to spin in reverse.

ACTION
A new clutch fan (only for snow plow applications) may be installed to correct the condition. Cost of the new clutch fan and its installation is the
responsibility of the customer. Refer to Workshop Manual Section 303-03 for removal and installation.

Parts Block

WARRANTY STATUS: Information Only - Not Warrantable

All Other Service Bulletins for Fan Clutch: > < Cooling System - Engine Cooling Fan is Inoperative|Page 3005