F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
11. Remove the bolts, bracket and the accessory drive belt idler pulley.
^
To install, tighten to 25 Nm (18 ft. lbs.).
12. Remove the bolts and the accessory drive belt tensioner.
^
To install, tighten to 25 Nm (18 ft. lbs.).
13. Disconnect the wire retainer, generator electrical connector and B+ wire.
^
To install, tighten to 8 Nm (71 inch lbs.).
14. Remove the bolts and generator with mounting bracket.
^
To install, tighten to 47 Nm (35 ft. lbs.).