F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
20. Disconnect the heater hose from the front cover and position aside.
21. Install one lifting eye on the LH cylinder head.
22. CAUTION: Do not use the special tool to raise the engine. Damage to the special tool or vehicle may occur.
NOTE: The ball studs may have to be removed.
NOTE: This procedure requires a second bolt hook assembly. The tools are available through Rotunda tools with these numbers: bolt hook
303-F070-6, handle 303-F070-8, bracket 303-FO70-7 and washer 303-F070-12004.
Install the special tool.
23. NOTE: The engine must be raised evenly.
Using a lifting crane, raise the engine until the turbocharger is almost touching the cowl. Secure the engine with the special tool.
