ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Intake Manifold|Removal|Page 2723 > < Intake Manifold|Removal|Page 2721
Page 8
background image

^

Tighten to 8 Nm (71 inch lbs.).

Vehicles with single generator 
30. Install the accessory drive belt.

Vehicles with dual generators 
31. Install the generator with mounting bracket and the 4 bolts.

^

Tighten to 47 Nm (35 ft. lbs.).

32. Connect the B+ wire, generator electrical connector and wiring harness retainer.

^

Tighten to 8 Nm (71 inch lbs.).

33. Install the accessory drive belt tensioner and bolts.

^

Tighten to 25 Nm (18 ft. lbs.).

Intake Manifold|Removal|Page 2723 > < Intake Manifold|Removal|Page 2721