F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
![background image](/ford/f_550_2wd_super_duty/v8-6.0l_dsl_turbo_vin_p/Page-2325002.png)
7. Spread the retainer tabs apart and slide the retainer off the tube.
8. Discard the retainer.
Connect
1. Clean the tubes and lubricate with MERPOL(R) meeting Ford specification ESE-M99B144-B or plain water.
2. Install a new coupling retainer, spacer, and lubricated O-ring seals into the quick disconnect coupling housing.
3. Push the heater water hose with a quick disconnect coupling onto the tube.
4. Make sure the coupling is fully engaged by lightly pulling on the heater water hose.