F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
1. Install the O-ring seal and gasket.
2. NOTE:
-
Apply clean engine oil to the O-ring seal.
-
Position the grommets and spacer prior to installing the EGR cooler.
Install the EGR cooler and stud bolts hand-tight.
3. Install the EGR cooler bolt.
-
Tighten to 13 Nm (10 lb-ft).
4. Tighten the EGR cooler stud bolts.
-
Tighten to 13 Nm (10 lb-ft).
5. Install the intake manifold.