F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
2. Apply Threadlock 262 sealant to the glow plug sleeve in 2 places.
3. Install the glow plug sleeve into the glow plug bore until it bottoms.
4. Clean the glow plug sleeve after installation with a nylon brush and solvent. Make sure Threadlock 262 sealant is cleaned out before it hardens.
5. Install the press-in-place gasket.
-
Install new dowels in the cylinder head and the press-in-place gasket.
6. Position the rocker arm carrier on the cylinder head. Install the bolts.
-
Tighten to 31 Nm (23 lb-ft).
7. Install the lifting bracket on the cylinder head.
8. Install the cylinder heads.