F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
5. NOTE: RH side shown, all others similar.
Remove the bolt and the child safety seat tether anchor.
-
To install, tighten to 30 Nm (22 lb-ft).
All vehicles
6. WARNING: It is important that the bolt/anchor be securely tightened to specification. Otherwise, the child's safety seat may not be
correctly secured and the child can be injured in case of a sudden stop or accident.
NOTE: For SuperCab, after seat backrest installation, make sure the child safety seat tether anchor strap is accessible and not trapped between the
seat backrest and cab back panel.
To install, reverse the removal procedure.
7. Check the active restraint system for correct operation.