F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Center Support: Service and Repair
Driveshaft Center Bearing
Material
Disassembly and Assembly
1. CAUTION: Do not clamp the driveshaft in the jaws of a vise or a similar holding fixture.
Place the driveshaft on a suitable workbench.
2. Remove the driveshaft slip yoke and the slip yoke boot.
3. Remove the rubber insulator surrounding the bearing.
1
Remove the driveshaft center bearing retainer.
2
Remove the driveshaft center bearing bracket.
3
Remove the rubber insulator.
4. Using a suitable press, remove the bearing from the driveshaft.
5. Using a suitable press, remove the dust slinger.
