F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
4. Remove the left transition block and rubber stop from the sliding window trough.
5. Remove the left transition block from the cable end.
6. Disconnect the swag from the power sliding window.
7. Pull the left cable end out of the sliding window trough.
8. Repeat Steps 4 through 7 for the right side.
All vehicles
9. NOTE:
-
Power sliding rear window shown, fixed rear window similar.
-
Removal of the rear window glass requires an assistant to hold the rear window glass as it is pushed out.
