F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
-
Remove the pushpin retainer.
-
Lift the door opening scuff plate trim panel upward to release the retaining clips.
3. Position aside the rear door opening weatherstrip.
4. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or the cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover upward.
2
Remove the shoulder safety belt guide bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
3
Remove the shoulder safety belt guide.
5. Remove the safety belt anchor.
-
Remove the safety belt anchor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
-
Remove the safety belt anchor.
6. Remove the B-pillar trim panel.
-
Route the safety belt and the shoulder safety belt guide through the B-pillar trim panel.
7. To install, reverse the removal procedure.
Crew Cab
B-PILLAR TRIM PANEL - CREW CAB
Exploded View
