F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
12. NOTICE: Only use hand tools when installing the engine mount retaining nuts or damage to the engine mount may occur.
Install the new LH engine mount retaining nuts.
^
Tighten to 200 Nm (148 lb-ft).
13. Install the 2 new upper studs for the RH engine mount.
^
Tighten to 80 Nm (59 lb-ft).
14. NOTICE: Only use hand tools when installing the engine mount retaining nuts or damage to the engine mount may occur.
Install the new RH engine mount retaining nuts.
^
Tighten to 115 Nm (85 lb-ft).
15. Position the RH turbocharger inlet pipe in the vehicle.