F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
37. Install the cooling fan electrical connector into the stator. Connect the electrical connector for the engine cooling fan.
38. NOTE: Use a back-up wrench on the high-pressure fuel injection pump fittings.
Install new copper sealing washers, high-pressure fuel injection pump supply tube, high-pressure fuel injection pump-to-fuel cooler return tube and
nuts at the high-pressure fuel injection pump.
^
Tighten to 38 Nm (28 lb-ft).
39. Install the retaining nuts for the fuel injection pump supply tube.
^
Tighten to 11 Nm (97 lb-inch).