F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
Oil Separator: Service and Repair
CRANKCASE VENT OIL SEPARATOR
Removal and Installation
1. Disconnect the crankcase vent oil separator-to-air cleaner outlet tube hose.
-
Discard the clamp.
2. Disconnect the oil return tube from the crankcase vent oil separator.
3. Remove the 4 bolts and the crankcase vent oil separator.
-
To install, tighten to 13 Nm (10 lb-ft).
4. Remove and discard the crankcase vent oil separator seal.
5. To install, reverse the removal procedure.
-
Install a new crankcase vent oil separator seal.
-
Install a new crankcase vent oil separator-to-air cleaner outlet tube hose clamp.